Rockwell Automation 2090-U3BB-DM12 CN1 Control Interface Breakout Boards Installation Instructions User Manual
Control interface breakout boards, Installation instructions, About the control interface breakout board
Installation Instructions
Control Interface Breakout Boards
Catalog Numbers
2090-U3BB2-DM44, 2090-U3BB-DM12
About the Control Interface Breakout Board
These boards provide discrete wiring terminations for signals on the CN1 I/O connector. The
44-pin breakout board (catalog number 2090-U3BB2-DM44) can be used with any Ultra3000
drive. The 12-pin breakout board (catalog number 2090-U3BB-DM12) is intended for use with
SERCOS drives but may be used in non-SERCOS applications with minimal I/O requirements.
IMPORTANT
You must supply an external 5.2V DC auxiliary power source to retain control
power when main power is removed from Ultra3000 2098-DSD-005,
2098-DSD-010, and 2098-DSD-020 drives.
This manual is related to the following products: