Rockwell Automation 2711P-RSACDIN AC Power Supply - Manual (Page 9)

AC Power Supply for PanelView Plus/PanelView Plus CE Terminals 9
Publication 2711P-IN005C-EN-P - March 2007
Diagnostic Indicator
The power supply has one indicator.
Specifications
Indicator Description
ON (green) Output voltage is greater than 20.4V dc, but less than 28V dc
OFF No power applied to power supply.
Output voltage exceeded 35V dc, and overvoltage protection
shut down unit.
Output current is above 3 A.
Input Specifications
Nominal Supply Voltage 120V ac, 47…63Hz; 1.7 A maximum
230V ac, 47…63 Hz; 1.1 A maximum
Voltage Range 85…265V ac
Inrush Current 40 A typical, 1 ac cycle @ V
in
265V ac, 55°C
Interruption Output voltage will stay within specification when input drops out
for 1/2 cycle @ 47 Hz, 85V ac with maximum load
Output Specifications
Nominal Output Voltage +24V dc SELV
Voltage Range 20.4…27.6V dc (includes noise and 5% ac ripple)
24V DC
POWER SUPPLY
24V
COM
2711P-RSACDIN
POWER
PanelView Plus
Power
Indicator
The power indicator is on (green) when voltage at the output
is between 20.4 V dc and 28V dc.