Installation checklist – Rockwell Automation 2090-SCVPx Fiber Optic Cable Installation Quick Reference User Manual
Page 9
Fiber Optic Cable Installation 9
Publication 2090-QR001D-EN-P – April 2005
Installation Checklist
Use the following installation checklist to ensure proper handling.
Installation procedure
Complete
Comments
Maximum cable length not exceeded
Bending radius not exceeded
Maximum tensile load not exceeded;
proper pulling techniques used
Cable not squeezed or bent
Cable installed without loops in raceways
Cable protected from sharp edges
Fiber cable installed in separate raceways from
copper
Cable connector cleanliness maintained
Cable connector finger tight to transceivers
ATTENTION
Hand tighten connectors. Do not use tools to tighten connectors as they
may cause damage to cables and inhibit signal transmission.
This manual is related to the following products: