Rockwell Automation 2711E-NK5 Replacing the PanelView 1400E Keypad Faceplate - Manual (Page 5)

Replacing the PanelView 1400e Keypad Faceplate 5
7. Gently pull the keypad faceplate away from the unit at the top.
To prepare the new keypad faceplate:
Important: Prepare the new keypad faceplate in a dust-free
environment.
1. Lay the keypad faceplate face down on a clean, soft, protective
surface.
2. Use glass cleaner to remove all fingerprints, streaks, and lint from
the back of the keypad faceplate and the front surface of the CRT
screen.
Important: Don’t spray glass cleaner into the open terminal
to clean the CRT surface. Instead, spray the
glass cleaner onto a clean cloth, and wipe the
CRT surface.
3. If you had customized your legend key inserts, you may want to
remove the customized legend key inserts from your old keypad
faceplate and insert them into your replacement keypad faceplate.
Step 3. Preparing the New
Keypad Faceplate