Rockwell Automation 2090-UCSR-P900 900 Watt Passive Shunt Module Installation User Manual
Page 3
Publication 2090-IN001A-EN-P — March 2001
900 Watt Passive Shunt Module 3
If the work environment dictates, mount the shunt module in an
enclosure providing protection against dust and splashing water
(IP54), or dust free and protected against water jets (IP65).
Many NEMA (National Electrical Manufacturers Association) Type 4
cabinets provide this level of protection.
ATTENTION
!
Avoid contaminating electronic components.
Provide a quality air source to cabinets; free of
debris, oil, corrosives, or electrically conductive
contaminates. All cabinets should have scheduled
inspections and be cleaned as needed.
Failure to observe these safety procedures could
result in breakdown and damage to equipment.
ATTENTION
!
If you mount the shunt module inside a cabinet, you
must make sure that the ambient temperature inside
the cabinet does not exceed 50° C (122° F).