Rockwell Automation 2707-NP DTAM PLUS GETTING STARTED USER MANUAL - Manual (Page 6)

A–B
1
Chapter
1–1
Using This Manual
Read this chapter to familiarize yourself with the rest of the manual. You will
learn about:
D Contents of this manual
D Intended audience
D Related publications
Use this manual to become familiar with the operation of the DTAM Plus
and the DTAM Plus Programming Software (Catalog No. 2707-NP). This
manual describes how to create, load and run a sample application.
Table 1.A
Chapter Descriptions
Chapter Title Purpose
1 Using this Manual Provides an overview of the manual.
2 What You Need
Covers equipment and software needed
to create and run the sample application.
3 Sample Application Overview Briefly describes the sample application.
4
Installing DTAM Plus
Programming Software
Tells how to install the DTAM Plus
Programming Software on your
personal computer.
5 Creating a Sample Application
Gives step-by-step instructions for
creating the sample application.
6 Downloading the Application
Explains how to transfer the application
from your personal computer to the
DTAM Plus.
7 SLC Application File
Provides the SLC ladder program
required to run the sample application.
8 Running the Application
Describes how to run the sample
application with an SLC 500.
Chapter Objectives
Overview of this Manual