Rockwell Automation 2707-NP DTAM PLUS GETTING STARTED USER MANUAL - Manual (Page 11)

A–B
3
Chapter
3–1
Sample Application Overview
This chapter gives a description of the sample application you are going to
enter. Understanding the function of the application will help you understand
the configuration instructions in Chapter 5.
Figure 3.1 illustrates the sequence of operator screens that are displayed
using the sample application.
Figure 3.1
Sample Application Flowchart
1
2
3
4
Pump Speed
****
0
RPM
2000
1
2
3
Tank Level
**** Gallons
Mixer is OFF
Enter Desired Temp
Actual:
Desired:
Valid Range: 140-170
*** Deg. C
*** % Full
Press Next
ƞƞ
Mixer Status
ƞƞ
PRE:T4:30.PRE
*** T4:31.PRE
RESTRICTED ACCESS
ENTER CODE
:
***
*** T4:32.PRE
Press Next
Download Batch Times
For Chocolate Chip?
Press ”Y” to Execute
NEW: T4:30.PRE
15 T4:31.PRE
5
25 T4:32.PRE
Enter 60 to
Advisor:
Data Entry:
Simulate an Alarm
0
Mixer OL is Tripped
03:19 Oct 28 92
Press ”Y” to Clear
❶
Back to Main Menu
❶
Back to Main Menu
❶
Screen #1 Main Menu
Screen #11 Bar Graph Screen #20 Sub-Menu
Screen #21 Data Entry
Screen #22 Data Display
Screen #23 Data Display
Screen #39 Security
Screen #27 Data Display
Screen #28 Recipe
Screen #40 Data Entry
Screen #60 Alarm
Screen #29 Data Display
15
5
25
Press Next ◆◆◆ Deg C.
❶
Back to Main Menu
❶
Back to Main Menu
Tank Temp Desired
Tank Level
Mixer Status
Pump Application
Tank 1 Parameters
Batch Recipes
Alarm Demo
◆◆
Chapter Objectives
Application Flowchart