Rockwell Automation 2755 AdaptaScan Bar Code Readers - Manual (Page 65)

Downloading Configurations 5–4
This section shows how to download a configuration to one or more
Readers. Verify that your computer is connected to a Reader as
shown on previous page.
To download a configuration to a Reader:
1. Run the AdaptaScan software (Catalog No. 2755-ASN).
2. From the Project menu, choose Open.
The Project Open dialog appears.
Highlight
Project
3. Select and open the project containing the configuration you want
to download.
4. Verify that each device within the project has a unique DeviceNet
address (even if you are not using DeviceNet communications).
With the Reader name highlighted, click the Device button to
open the Device dialog and set the address.
Set to
Unique
Address
5. From the Project dialog, select the Reader or Readers to which
you want to download a configuration. To select multiple
Readers, hold down the [Ctrl] button while making the selections.
6. Click the Send Device button to download to a selected Reader or
the Send All button to download to all Readers on the network.
The following message appears during the download.
Resetting. Please Wait . . .
Sending. Please Wait . . .
When the download is complete, this message disappears.
Downloading
a Configuration