Install a hard disk drive in the 200r computer – Rockwell Automation 6155R Industrial Non-display Computers User Manual

Page 43

Publication 6155R-UM001G-EN-P - July 2007

Replace System Components 43

Install a Hard Disk Drive in the 200R Computer

Follow these steps to install a hard disk drive in the VersaView 200R
computer.

1. Connect the IDE ribbon cable to the hard disk drive.

2. Place the hard disk drive into the bracket and secure it by using

the four screws; torque to 0.452 Nm (4 lb-in).

3. Gently slide the hard disk drive assembly into the bracket.

4. Secure the hard drive carrier by fastening the four screws to the

bottom of the enclosure and torque to 0.678 Nm (6 lb-in).