Rockwell Automation 2090-CNSxxx Kinetix 6000M Series B Network Communication Cable Installation Instructions User Manual
Kinetix 6000m series b network cable, Installation instructions, About the network cable
Installation Instructions
Kinetix 6000M Series B Network Cable
Catalog Numbers 2090-CNSSPSS-AA
xx, 2090-CNSRPRS-AAxx, 2090-CNSSPRS-AAxx,
2090-CNSRPSS-AA
xx
About the Network Cable
A Kinetix
® 6000M integrated drive-motor system transfers motion commands to the integrated
drive-motor (IDM) through a daisy-chain network using twisted wire pairs for transmitting and
receiving the signals.
The network communication cable is installed between the Kinetix 6000M integrated
drive-motor power interface module (IPIM) and each integrated drive motor in the system. See
the Kinetix 6000M Series B Cable Routing Diagram on
page 4
.
Topic Page
Important User Information
Before You Begin
Install the Cable
Schematic and Connector Pinouts
Additional Resources