Rockwell Automation 6156 Industrial 14 inch CRT Monitors - Manual (Page 10)

Industrial 14” CRT Monitors 10
Publication 6156-2.0
Video Cables
The Bulletin 6156 Industrial Monitor can be configured with various
industrial grade video cables. The standard HD15 cable is equipped
with a conventional HD15 connector at each end.
Figure 4
Standard Video Cable
1 2 3 4 5
6 7 8 9 10
11 12 13 14 15
HD15
View looking into the Pin End of the
Male connector
Table A
Standard Video Cable Construction
Monitor HD15 Signal Description Computer HD15
2 Green Video 2
7 Green Video Ground 7
1 Red Video 1
6 Red Video Ground 6
3 Blue Video 3
8 Blue Video Ground 8
5 Composite Sync 5 (Not Used)
11 (Floating) ID0 11
12 (Floating) ID1 12
4 (Gnd) ID2 4
9 Not Connected 9
14 Vertical Sync 14
10 Sync Ground 10
15 Control 15 (Not Used)
13 Horizontal Sync 13
In addition to the standard video cable, special low noise coaxial
video cables are available in various lengths. They are equipped with
a DB-13C3 connector at the monitor end and a standard HD15
connector at the computer end.