Rockwell Automation 2090-CPBM7DF-16RAxx SpeedTec Right-angle Standard Power and Feedback Cables - Manual

Installation Instructions
SpeedTec Right-angle Standard Power and
Feedback Cables
Catalog Numbers 2090-CFBM7DF-CERA
xx, 2090-CPBM7DF-16RAxx
About Right-angle Standard Feedback and Power Cables
Standard feedback and power cables have an M23 SpeedTec DIN connector at the motor end,
and flying leads at the drive end. These cables can be bent or reformed during installation or
maintenance, but should not be used in a continuous flex operation.
Connectors on these cables can be rotated or repositioned to the left or right.
•
The feedback connector rotates up to 200° to the right of center, or 124° to the left of
center.
•
The power connector can be repositioned in 90° increments.
Topic Page
Important User Information 2
Before You Begin 3
Cable Installation Guidelines 4
Connector Rotation or Repositioning 5
2090-CFBM7DF-CERAxx Cable Outline and Schematic 6
2090-CPBM7DF-16RAxx Cable Outline and Schematic 6
Cable Specifications 7
Additional Resources 8