Rockwell Automation 7477-IC2VC PlantPAx Server and Workstation Bundles User Manual - Manual (Page 6)

6 Publication 7477-UM001A-EN-E - August 2009
Chapter 1 PlantPAx Servers and Workstations
Use the cloning utility to:
• Create, resize, or delete a recovery partition on the hard disk drive.
• Create a back-up of the active system image in the recovery partition of
the hard drive.
• Restore an archived system image from the recovery partition.
• Use the ghost utility to manually perform system operations to create a
bootable CD or DVD with a back-up image.
For information on using the cloning utility, see the Cloning Utility Technical
Data, publication
6000-TD001 . This publication is available on the desktop of
each PlantPAx computer in the folder named PlantPAx Documentation, as
well as via Literature Library.
Process System Support PriorityConnect Systems Support offers support tailored for process
automation systems available through TechConnect Support. PriorityConnect
contracts offer these features:
• Highly experienced team of engineers with training and systems
experience across the entire Integrated Architecture system for both
process systems
• Process support at a systems level provided by process engineers
• Priority case handling by Senior Systems Support Group with proactive
case resolution follow-up
• Unlimited online support requests
• Access to hundreds of other support engineers as needed
• Use of online remote diagnostic tools
• Access to otherwise restricted TechConnect Knowledgebase content
• Technical Reference Library DVD
• 24x7x365 phone-support coverage upgrade option
For more information, contact your local distributor or Rockwell Automation
representative, or visit
http://support.rockwellautomation.com .
Additional Resources See these documents for more information.
Resource Description
PlantPAx Process Automation System Quick
Start, publication
7477-QS001
Startup a new PlantPAx server or workstation and configure Windows settings.
PlantPAx Process Control System Profile,
publication
PROCES-SG001
Overview of the three typical process architectures: independent, centralized, and
distributed.
PlantPAx Process Automation System
Reference Manual, publication
PROCES-RM001
Architecture definitions and design recommendations for PlantPAx process automation
systems.