Before you begin – Rockwell Automation 2090-KFBM6-16AA Power with Brake Connector Kit for TL-Series Servo Motors User Manual
Page 3
Power with Brake Connector Kit for TL-Series Servo Motors Installation Instructions 3
Publication 2090-IN018A-EN-P - June 2010
Before You Begin
Identify the wire colors and pinouts specific to your TL-Series (Bulletin TLY) motor by
referring to the Power Connector information on
You should also refer to the manual for your drive to determine pinouts and wire connections
appropriate to these connections.
TL-Series (Bulletin TLY) motors are compatible with these Allen-Bradley drives:
• Kinetix 300
• Kinetix 2000
• Kinetix 6000
• Kinetix 6200
• Kinetix 6500
• Ultra3000
• Ultra5000
Refer to the Parts List on
for wire sizes compatible with this connector kit.
ATTENTION: To prevent electrical shock, disconnect the connector, motor, and
drive from the power source before installing or servicing.
This device should be used only in an enclosure that prevents exposure to
contaminants.
ATTENTION: When installing a cable, restrain it so that uneven tension or
flexing at the connector does not occur.
Excessive and uneven force at the cable connector may result in damage to the
housing and contacts as the cable flexes.
Failure to observe this safety procedure could result in damage to the motor
and its components.