Rockwell Automation 2361 Snubber Assembly Replacement - Manual (Page 5)

Snubber Assembly Replacement (for 1250 and 1650A 1395 DC Drives) 5
Publication 2361-5.14 - July 1998
Removing the Snubber Assembly 1. Remove the screw which connects the snubber lead to the AC
busbar.
2. Remove the screw which connects the snubber lead to the heat-
sink.
3. Remove the two nuts on the right side of the snubber assembly
and lift the assembly off.
Installing the Snubber Assembly 1. Mount the new snubber assembly in place over the two bolts on
the right side of the heatsink assembly.
2. Secure the nuts and torque to 10 lb-ft.
3. Fasten the snubber lead (which extends from the top of the
assembly) to the AC busbar.
4. Fasten the snubber lead (which extends from the middle of the
assembly) to the heatsink.
1
2
3