Rockwell Automation 2361 Snubber Assembly Replacement - Manual

R EPLACEMENT K IT I NSTRUCTIONS
Snubber Assembly Replacement
(for 1250 and 1650A 1395 DC Drives)
Contents This document shows how to remove and replace a snubber assembly
in a 1250 or 1650A 1395 DC drive.
What This Kit Contains Using the table below, verify that you have received the appropriate
items in your kit:
Other Items Needed Before you begin, be sure you also have the following:
• Tools needed for:
• Removing, fastening, and torquing nuts and bolts (ratchet
with extension, 5/16” and 9/16” sockets, torque wrench
for 10 to 25 lb-ft)
• Removing and fastening screws (slotted and Phillips
screwdrivers)
• Testing for voltage (multimeter)
• Documentation:
• Your drive system schematics
• Publication 1395-5.40, Bulletin 1395 Digital DC Drive–
User Manual
• Publication 2361-5.01, Bulletin 1395 Digital DC Drive in
Bulletin 2361 Motor Control Center for Drive Systems–
User Manual
For this part: You should receive this quantity:
snubber assembly 1