Rockwell Automation 1794-OF8IH FLEX I/0 8 Isolated Output Analog Module - Manual (Page 25)

FLEX I/O Isolated Output HART Analog Module 25
Publication 1794-IN120C-EN-P - April 2009
North American
temperature code T4
IEC Temp Code T4
Dimensions (HxWxD),
approx. 94.0 x 94.0 x 66.0 mm (3.7 x 3.7 x 2.6 in.) with module
installed in base
(1)
Includes offset, gain, nonlinearity. and repeatability error terms.
(2)
Use this Conductor Category information for planning conductor routing. Refer to Industrial
Automation Wiring and Grounding Guidelines, publication 1770-4.1.
The phase conductor is 0.34…2.5 mm². The ground conductor must be equal to or greater than the
phase conductor.
(3)
Engineering Units apply to HART data only.
Environmental
Attribute Value
Temperature, operating IEC 60068-2-1 (Test Ad, Operating Cold),
IEC 60068-2-2 (Test Bd, Operating Dry Heat),
IEC 60068-2-14 (Test Nb, Operating Thermal Shock):
0…55 °C (32…131 °F)
Temperature,
nonoperating IEC 60068-2-1 (Test Ab, Unpackaged Nonoperating Cold),
IEC 60068-2-2 (Test Bb, Unpackaged Nonoperating Dry Heat)
IEC 60068-2-14 (Test Na, Unpackaged Nonoperating Thermal
Shock):
–40…85 °C (–40…185 °F)
Relative humidity IEC 60068-2-30 (Test Db, Unpackaged Damp Heat):
5…95% non-condensing
Vibration IEC 60068-2-6 (Test Fc, Operating):
5 g @ 10…500 Hz
Shock, operating IEC 60068-2-27 (Test Ea, Unpackaged Shock):
20 g
FLEX I/O Isolated Output Analog Module - 1794-OF8IH
Attribute Value