Rockwell Automation 1794-OF8IH FLEX I/0 8 Isolated Output Analog Module - Manual

Installation Instructions
FLEX I/O Isolated Output HART Analog Module
Catalog Number 1794-OF8IH
Topic Page
Important User Information 2
Environment and Enclosure 3
Preventing Electrostatic Discharge 4
North American Hazardous Location Approval 5
Install the Module 7
Wire the Module 8
Ground the Module 10
Module Wiring 11
Cyclic HART Input Data 19
Status Indicator 23
Specifications 23
IMPORTANT
This module can only be used with 1794-ACN(R)15 with version 5.1 (or
greater) firmware, or 1794-AENT with version 4.2 (or greater) firmware. The
1794-AENT currently ships with version 4.1 firmware.
For more information about using this module with 1794-ACN(R)15 with
version 5.1 (or greater) firmware,, see
1794-RN071 .