Rockwell Automation 1738-OE4CM12 ArmorPoint 4-Channel 24V dc Analog Output Modules, Series A - Manual (Page 11)

ArmorPoint 4-Channel 24V dc Analog Output Modules, Series A 11
Publication 1738-IN025C-EN-P - March 2010
Network
Status Off Device is not on line:
- Device has not completed dup_MAC-id test.
- Device not powered - check module status indicator.
Flashing green Device is on line but has no connections in the
established state.
Green Device is on line and has connections in the
established state.
Flashing red One or more I/O connections in timed-out state.
Red Critical link failure - failed communication device.
Device detected error that prevents it from
communicating on the network.
Flashing
red/green Communication faulted device - the device has
detected a network access error and is in
communication faulted state. Device has received and
accepted an Identity Communication Faulted Request -
long protocol message.
I/O Status Off Module in CAL mode.
Solid green Device operating normally.
Flashing green Channel being calibrated.
Flashing red Open wire or no power.
Solid red Unused.
Status Indicators (Continued)
Indicator State Description