Rockwell Automation 1771-IFE/C INSTL.INSTRUCTIONS ANALOG INPU - Manual (Page 14)

Analog Input Module 14
Publication 1771Ć5.45 - July 1997
Value Description
Thermal Dissipation 8.52 BTU/hr (maximum)
Unscaled BCD and binary output to
processor
0000 to +4095
10
for polar ranges (0 to 5V, +1 to +5V, 0 to +20mA,
and +4 to +20mA)
-4095
10
to 4095
10
for bipolar ranges ( +5V, +10V, +20mA)
Engineering units sent to processor +9999
10
with selectable scaling
Internal scan rate
13.7 ms for 8 differential inputs (no digital filtering) -add 0.3ms for
filtering
27.4 ms for 16 single-ended input (no digital filtering) -add 0.3 for
filtering
Environmental conditions
Operational temperature:
Storage temperature:
Relative humidity: Operating
Storage
0 to 60 0 C (32 to 140 0 F)
-40 to 85 0 C (-40 to 185 0 F)
5 to 95% (without condensation)
5 to 85% (without condensation)
Conductors Wiring
Category
14 gauge (2mm 2 ) stranded (max.)
3/64 inch (1.2mm) insulation (max.)
Category 2 3
Keying
between 10 and 12
between 24 and 26
Wiring Arm Catalog Number 1771-WG
Field Wiring Arm Screw Torque 7Ć9 inchĆpounds
Agency Certification
(when product or packaging is marked)
О
О
О
О
ОО
ОО
О
О
marked for all applicable directives
Class 1 Div 2 Hazardous 4
User Manual Publication 1771Ć6.5.115
1 The inputs are protected to 200V. However, if an input terminal's voltage exceeds +14.25V as referenced to module common, channelĆtoĆchannel
crosstalk can cause invalid input readings and invalid underrange/overrange bits.
2 Only 8 volts can be placed directly across the input when configured in the current mode.
3 Refer to publication 1770Ć4.1, "Industrial Automation Wiring and Grounding Guidelines for Noise Immunity."
4 CSA certificationĊ Class I, Division 2, Group A, B, C, D or nonhazardous locations.