Rockwell Automation 1738-IE4CM12 ArmorPoint 4-Channel 24V dc Analog Input Modules, Series A - Manual (Page 7)

ArmorPoint 4-Channel 24V dc Analog Input Module, Series A 7
Publication 1738-IN024C-EN-P - March 2010
3. Push the module down until it engages the latching mechanism.
You will hear a clicking sound when the module is properly engaged.
The locking mechanism locks the module to the base.
Remove the Module From the Mounting Base
Follow the instructions to remove the module from the mounting base.
1. Put a flat blade screwdriver into the slot of the orange latching
mechanism.
2. Push the screwdriver toward the I/O module to disengage the latch.
The module lifts up off the base.
3. Pull the module off of the base.
MOD
NET
0
1
1738-IE4CM12/A
Analog Current In
0 1
2 3
2
3
Module bridges two bases.
44368