Rockwell Automation 1788-ENBT EtherNet/IP Daughtercard Installation Instructions User Manual
Page 12
Publication 1788-IN054A-EN-P - September 2002
PN 957678-55
© 2002 Rockwell Automation. Printed in the U.S.A.
Allen-Bradley, FlexLogix, and DriveLogix are trademarks of Rockwell Automation, Inc.
RSLogix is a trademark of Rockwell Software, Inc.
Vibration
IEC60068-2-6 (Test Fc, Operating):
5g @ 10-500Hz
Weight
0.1 kg (0.2 lb.)
Certifications:
(when product is marked)
c-UR-us
UL Recognized Component Industrial Control Equipment for
Class I, Division 2 Group A,B,C,D Hazardous
Locations, certified for US and Canada.
CE
(3)
European Union 89/336/EEC EMC Directive, compliant with:
EN 61000-6-4; Industrial Emissions
EN 50082-2; Industrial Immunity
EN 61326; Meas./Control/Lab., Industrial
Requirements
EN 61000-6-2; Industrial Immunity
C-Tick
Australian Radiocommunications Act, compliant with:
AS/NZS 2064; Industrial Emissions
EtherNet/IP ODVA conformance tested to EtherNet/IP specifications.
(1)
To comply with UL restrictions, this equipment must be powered from a source compliant with the following: Class 2 or
Limited Voltage/Current, as defined in UL 508 Seventeenth Edition Section 32.
(2)
For information on conductor routing refer to publications 1770-4.1, Industrial Automation Wiring and Grounding Guidelines,
and ENET-IN001, EtherNet/IP Media Planning and Installation Manual.
(3)
See the Product Certification link at www.ab.com for Declarations of Conformity, Certificates, and other certification details.