Rockwell Automation 1792D-16BVTOD ArmorBlock MaXum 16 Input Module Series B User Manual
Armorblock maxum 16 input module series b, Installation instructions
Publication 1792D-IN016B-EN-P - September 2000
Installation Instructions
ArmorBlock MaXum 16 Input Module
Series B
(Cat. No. 1792D-16BVTOD)
This ArmorBlock MaXum
I/O module (Cat. No. 1792D-16BVT0D) is
a stand-alone 24V dc I/O product which communicates via a
DeviceNet
network. The sealed housing of this module requires no
enclosure.
This model has 16 inputs accessed through Y splitter cables. Inputs
are 24V dc automatically configured for PNP (sourcing) or NPN
(sinking) devices. Diagnostic features included are short circuit and
open wire detection reported to the point level. Local logic control
has been added to the Series B version of this product.
30723-M
Table of contents
Document Outline
- ArmorBlock MaXum 16 Input Module Series B
- Package Contents
- European Union Directive Compliance
- Install Your ArmorBlock MaXum I/O Module
- Set the Node Address
- Install the Module
- Connect the Input Cord Sets to the MaXum Module
- Communicate With Your ArmorBlock MaXum Module
- Troubleshoot with the Indicators
- Specifications
- Hazardous Location Approval
- Back Cover