About the devicenet daughtercard, Required software, Related publications – Rockwell Automation 1788-DNBO DeviceNet Daughtercard Installation Instructions User Manual
Page 4

4 DeviceNet Daughtercard
Publication 1788-IN053A-EN-P - December 2001
About the DeviceNet Daughtercard
The network daughtercard architecture defines a common
hardware and software interface that several different network
interface cards will support. This lets products that have been
designed to support the network daughtercard option support
several different Rockwell Automation networks.
You can install the 1788-DNBO DeviceNet daughtercard in any
host device that supports the DeviceNet daughtercard.
(1)
Required Software
Use RSNetWorx for DeviceNet 3.0 Service Pack 2 or later to configure the scanlist for the
1788-DNBO daughtercard.
Use RSLogix 5000 programming software V10 or later to configure a FlexLogix system for
use with the 1788-DNBO daughtercard.
Related Publications
(1)
The host device must provide suitable power source per the restrictions in the specifications table on
Publication Title
Publication Number
DeviceNet System Overview
DN-2.5
DeviceNet Selection Guide
DNET-SG001A-EN-P
DeviceNet Cable System Planning and Installation Manual
DN-6.7.2
DeviceNet Media
1485-CG001A-EN-P
Getting Results with RSNetWorx for DeviceNet
9399-DNETGR
FlexLogix System User Manual
1794-UM001C-EN-P
31291-M