Rockwell Automation 1793-IB2XOB2PS FLEX INTEGRA 2 INPUT/2 PROTECTED OUTPUT MODUL - Manual (Page 6)

6 FLEX Integra 2 Input/2 Protected Output Module
Publication 1793-5.3 - September 1999
Memory Mapping
Setting the Input Delay Time
You can select the input delay time (DT) for input channels 00 and 01.
Select the input delay time by setting the corresponding bits in the
configuration word (word 3) for the module.
For example, to set a delay time of 4ms for an input module at address rack
1, module group 0, set bits 02, 01 and 00 as shown below.
Input Delay Times
Bit/
Word
15 14 13 12 11 10 09 08 07 06 05 04 03 02 01 00
Read Reserved I1 I0
Write Reserved O1 O0
Write Reserved FT time
Where: I = Input
O = Output
FT = Filter time
02 01 00 Filter Time for Inputs 00-01
Selected
Filter Time
0 0 0 Filter Time 0 (default) 512
μs
0 0 1 Filter Time 1 1ms
0 1 0 Filter Time 2 2ms
0 1 1 Filter Time 3 4ms
1 0 0 Filter Time 4 8ms
1 0 1 Filter Time 5 16ms
1 1 0 Filter Time 6 32ms
1 1 1 Filter Time 7 64ms