beautypg.com

Rockwell Automation 1793-IB2XOB2PS FLEX INTEGRA 2 INPUT/2 PROTECTED OUTPUT MODUL User Manual

Flex integra 2 input/2 protected output module, Installation instructions, Module installation

background image

FLEX Integra and FLEX I/O are
trademarks of Rockwell Automation

Publication 1793-5.3 - September 1999

Installation Instructions

FLEX Integra
2 Input/2 Protected Output Module

(Cat. No. 1793-IB2XOB2P and -IB2XOB2PS)

Module Installation

This module mounts on a DIN rail. It connects to an adapter or another
FLEX I/O or Integra module. Note: If using this module with FLEX I/O
modules, do not mount between FLEX I/O modules. Mount Integra
modules to the right of the FLEX I/O modules. To mount this module:

1.

Remove the cover plug (if used) in the male connector of the unit to
which you are connecting this module.

2.

Position the module on the 35 x 7.5mm DIN rail A (A-B pt. no.

199-DR1).

3.

Rotate the module onto the DIN rail with the top of the rail hooked
under the lip on the rear of the module.

41355

30720-M

A

A

This manual is related to the following products: