Step 7 - uninstalling the flash tool, Back cover, Delete all files within that directory by typing – Rockwell Automation 1785 User Mnl. PLC-5 Prog.Control Flash User Manual

Page 10: Change to the root directory by typing, Remove the flash directory by typing

Publication 1785-6.2 March 1998

Supersedes Publication 1785-6.2 June 1997

Publication 1785-6.2-RN2 July 1997

955131-61



Step 7 - Uninstalling the Flash Tool

We recommend that you remove the flash tool directory and all of the files it
contains. Follow these steps to uninstall the flash tool.

Important: Make sure you are in the flash directory that you created on the

hard drive so that you do not accidentally delete the wrong files.

1. On the programming terminal, change to the directory containing the

firmware files by typing:

cd \flash

2. Delete all files within that directory by typing:

del *.*

3. Change to the root directory by typing:

cd\

4. Remove the flash directory by typing:

rd flash

PLC-5 and ControlNet are trademarks of Allen-Bradley, Inc. a Rockwell International Company
Ethernet is a registered trademark of DEC, Intel, and Xerox Corporation.
Windows, Windows 95, and Windows NT are registered trademarks of Microsoft in the U.S. and other countries.

Return