Rockwell Automation 1751-SLBP SynchLink Bypass Switch Block Installation Instructions User Manual

Page 6

Text mode
Original mode

6 SynchLink Bypass Switch Block

Publication 1751-IN003B-EN-P - September 2001

2. Hook the lip of on the rear of the switch block onto the top of the DIN rail

and rotate the switch block onto the rail.

3. Press the bypass switch block down to the DIN rail until flush.

The locking tab should snap into position and lock the switch block to the
DIN rail. If the tab does not snap into position, follow step 4. If the tab does
snap into position, proceed to step 5.

31203b-M

31203c-M