Rockwell Automation 1751-SLBP SynchLink Bypass Switch Block Installation Instructions - Manual (Page 10)

10 SynchLink Bypass Switch Block
Publication 1751-IN003B-EN-P - September 2001
Status Indicators
Mounting Dimensions
Figure 3 provides mounting dimensions for the switch block.
Figure 3 - Mounting dimensions
Indicator When LED is ON
Power ON 24V dc power is applied to the switch block
Bypass ON block is in the Bypass mode
RxIN1 optical signals are received from the upstream station
TxOUT1 optical signals are transmitted to the downstream station
RxIN2 optical signals are received from the local station
TxOUT2 optical signals are transmitted to the local station
31234-M
4.12 in.
(105 mm)
3.6 in.
(91.4 mm)
3.94 in.
(100 mm) 2.76 in.
(70.1 mm)