Rockwell Automation 1738-EP24DC ArmorPoint I/O 24V dc Expansion Power Supply - Manual (Page 3)

Publication 1738-IN020A-EN-E - June 2004
ArmorPoint I/O 24V dc Expansion Power Supply, Series A 3
SHOCK HAZARD
Labels may be located on or inside the equipment to alert people that dangerous
voltage may be present.
BURN HAZARD
Labels may be located on or inside the equipment to alert people that surfaces may
be dangerous temperatures.
Important User Information
ATTENTION
Environment and Enclosure
This equipment is intended for use in overvoltage
Category II applications (as defined in IEC
publication 60664-1), at altitudes up to 2000 meters
without derating.
This equipment is considered Group 1, Class A
industrial equipment according to IEC/CISPR
Publication 11. Without appropriate precautions,
there may be potential difficulties ensuring
electromagnetic compatibility in other environments
due to conducted as well as radiated disturbance.
This equipment is supplied as "enclosed" equipment.
It should not require additional system enclosure
when used in locations consistent with the enclosure
type ratings stated in the Specifications section of this
publication. Subsequent sections of this publication
may contain additional information regarding
specific enclosure type ratings, beyond what this
product provides, that are required to comply with
certain product safety certifications.
NOTE: See NEMA Standards publication 250 and
IEC publication 60529, as applicable, for
explanations of the degrees of protection provided
by different types of enclosure. Also, see the
appropriate sections in this publication, as well as
the Allen-Bradley publication 1770-4.1 ("Industrial
Automation Wiring and Grounding Guidelines"), for
additional installation requirements pertaining to this
equipment.