Before you begin – Rockwell Automation 1757-SWKIT5000 Getting Started with ProcessLogix R500.1 Quick Start User Manual
Page 3

Getting Started with ProcessLogix R500.1 3
Publication 1757-QS500A-EN-P - October 2002
Rockwell Automation Technical Support
If you need any assistance with the information found in this document, first call your local
Rockwell Automation representative, then:
• Phone Support: (440) 646-5800
• Web Support:
http://www.ab.com, under Support, click Product Support
Your Questions or Comments about this Manual
If you find a problem with this manual, please use the How are We Doing? form located in
the Documentation section of Knowledge Builder to notify us.
Before You Begin
Before you begin, read through and follow this checklist to organize and implement your
ProcessLogix R500.1 Software and Hardware installation.
Before you start the tasks in this Quick Start, ensure that you have already:
• installed the chassis and power supply
• installed the 1757-PLX52 Control Processor Module (CPM)
• installed the CNB module
• installed the analog and digital I/O modules you want to use in your system
• set up and configured the ProcessLogix Server
• set up and configured the 1784-PCIC card
We explain how to do all of these tasks in the related manuals.
TIP
For details on installing ProcessLogix R500.1 software on a
ProcessLogix Server, refer to the ProcessLogix R500.1 Installation and
Upgrade Guide, publication 1757-IN500.