Rockwell Automation 1757-SWKIT5000 Getting Started with ProcessLogix R500.1 Quick Start - Manual (Page 11)

Getting Started with ProcessLogix R500.1 11
Publication 1757-QS500A-EN-P - October 2002
Configuring I/O Modules
Once you have created a controller, the next step is to configure the I/O modules you will use
in your system.
Before you can configure a module, you must add it from the library to your project:
1. Click the Library tab.
2. Click the
+
to the left of the IO icon to expand a list of available modules.
3. Create the I/O module blocks by dragging and dropping these modules, in the order
listed below, from the Library tab to the Project tab Root (on the second tree display).
You are prompted to change the I/O module name as they are added.
Catalog Number Name
1756-IF6I LabAI
1756-OF6CI or
1756-OF6VI
LabAO
1756-IB16I LabDI
1756-OB16I LabDO