Rockwell Automation 1790P-T8BV8B Profibus DP Digital Base Terminal Block Compact Block LDX I/O I.I. User Manual
Installation instructions, What this document describes
1PRE
Publication 1790-IN009B-EN-P - April 2003
Installation Instructions
PROFIBUS DP Digital Base Terminal
Block CompactBlock LDX I/O
(Cat. Nos. 1790P-T8BV8V, -T8BV8B, -T0W6)
What This Document Describes
This document describes how to install your PROFIBUS DP
CompactBlock LDX I/O.
GSD File Requirements
Current functionality of PROFIBUS DP CompactBlock LDX I/O
blocks requires GSD files.
These files are easy to install and are available online at:
www.ab.com/networks/gsd/
For information on:
Refer to page:
GSD File Requirements
below
Important User Information
2
Installing CompactBlock LDX I/O
5
Wiring the Terminal Blocks
9
Wiring the PROFIBUS Connector
10
Troubleshooting
12
Specifications
13
This manual is related to the following products:
Table of contents
Document Outline
- PROFIBUS DP Digital Base Terminal Block CompactBlock LDX I/O (Cat. Nos. 1790P-T8BV8V, -T8BV8B, -T...
- GSD File Requirements
- Important User Information
- Installing CompactBlock LDX I/O
- Set the Station Address on the Base Block
- Mount the Base Block
- Mount the Optional Expansion Blocks
- Wire the Terminal Block
- Wire and Connect the PROFIBUS DP Terminal Connector
- Connect Power to the Block
- Troubleshoot with the Indicators
- PROFIBUS DP Digital Base Terminal Block Specifications The following table contains specification...
- Back Cover