Rockwell Automation 1792-IB2XOB2E/B INSTL.INST ARMOR BLOCK 2 INPUT - Manual (Page 32)

ArmorBlock 2 Input/2 Output Module 32
Publication 1792-5.5 – October 1996
0, $ reserved
6, $ Link Path Size
”20 09 24 02 30 04”, $ Link Path to Output 2 status attribute.
0x0032, $ No support for settable path, scaling, or scaling
$ links.
$ Value is gettable only. Enumerated strings are
$ supported.
8, $ Data Type – unsigned short int
1, $ Data Size – (in bytes)
”Output 2 Status”, $ Parameter Name
””, $ Units String
$$$$$$$$$$ Help string $$$$$$$$$$$
”This parameter is the current status of Output 2.”,
0,1,0,
$ Min, Max, and Default values
1,1,1,0,0,0,0,0,0; $ Not Used
[Groups]
Group1=”Configuration”,5,1,2,3,4,5;
Group2=”I/O”,6,6,7,8,9,10,11;
[EnumPar]
Param1=”Enable”,”Disable”;
Param2=”0 ms”,”2 ms”,”4 ms”,”8 ms”,”16 ms”;
Param3=”0 ms”,”2 ms”,”4 ms”,”8 ms”,”16 ms”;
Param4=”Reset Outputs”,”Hold Last State”;
Param5=”Reset Outputs”,”Hold Last State”;
Param6=”Nothing Selected”,”Output #1”,”Output #2”,”Sensor Source Voltage”;
Param9=”Healthy”,”Faulted”;
Param10=”Healthy”,”Faulted”;
Param11=”Healthy”,”Faulted”;
Troubleshoot with the Indicators
The ArmorBlock I/O module has 3 types of indicators:
•
Mod/Net status indicator
•
Input fault indicator
•
individual I/O status indicators
Input I/O Status Indicators
Mod/Net Status Indicator Input Fault Indicator
MOD/NET
STATUS
INPUT
FAULT
NODE
ADDRESS
DA
TA
RA
TE
ARMORBLOCK I/O
1792-IB2XOB2E
Output I/O Status Indicators