Rockwell Automation 1738-IE2VM12 ArmorPoint 24V dc Analog Input Modules, Series A - Manual (Page 4)

Publication 1738-IN003B-EN-E - June 2005
4 ArmorPoint 24V dc Analog Input Modules, Series A
Mount the I/O Base To mount the I/O base on a wall or panel, use the screw holes
provided in the base.
Refer to the Drilling Dimensions illustration of the base with an
adapter to help you mount the base.
ATTENTION
Preventing Electrostatic Discharge
This equipment is sensitive to electrostatic discharge,
which can cause internal damage and affect normal
operation. Follow these guidelines when you handle
this equipment:
• Touch a grounded object to discharge potential
static.
• Wear an approved grounding wriststrap.
• Do not touch connectors or pins on component
boards.
• Do not touch circuit components inside the
equipment.
• If available, use a static-safe workstation.
• When not in use, store the equipment in
appropriate static-safe packaging.
IMPORTANT
The module must be mounted on a grounded metal
mounting plate or other conductive surface.
43769
4.02 in.
102 mm
1.81 in.
46 mm
Adapter
1.9 in.
47.2 mm
2.0 in.
50 mm
0.87 in.
22 mm
2.0 in.
50 mm
0.87 in.
22 mm
2.0 in.
50 mm
Drilling dimensions