Rockwell Automation 1768-L43_L45_L43S_L45S CompactLogix Controllers Installation Instructions User Manual
Compactlogix controllers, Installation instructions
Installation Instructions
CompactLogix Controllers
Catalog Numbers 1768-L43, 1768-L43S, 1768-L45, 1768-L45S
Topic
Page
About CompactLogix Controllers
Mount the Controller on a DIN Rail
Configure a Communication Driver
Insert or Remove a CompactFlash Card
Remove a 1768 or 1769 Module from the DIN Rail
Safety Status Indicators (1768-L43S and 1768-L45S Controllers only)
Table of contents
Document Outline
- 1768-IN004D-EN-P, CompactLogix Controllers Installation Instructions
- Important User Information
- Environment and Enclosure
- European Hazardous Location Approval
- General Safety Information for 1768-L43S and 1768-L45S Controllers
- North American Hazardous Location Approval
- Preventing Electrostatic Discharge
- About CompactLogix Controllers
- Verify Compatibility
- Required System Components
- Clearance Requirements
- Module Placement
- Install the Controller
- Panel Mount the Controller
- Mount the Controller on a DIN Rail
- Confirm the Installation
- Connect to the Controller
- Configure a Communication Driver
- Insert or Remove a CompactFlash Card
- Install Controller Firmware
- Remove a 1768 or 1769 Module from the DIN Rail
- Status Indicators
- Safety Status Indicators (1768-L43S and 1768-L45S Controllers only)
- Clear a Major Fault
- Clear a Nonrecoverable Fault
- Troubleshoot a Nonresponsive Module
- Troubleshoot System Power
- Specifications
- Additional Resources
- Back Cover