Rockwell Automation 1441-DYN25-MREC Time Recorder Extension Module for the Dynamix 2500 - Manual (Page 25)

Rockwell Automation Publication 1441-UM005A-EN-P - May 2011 25
Time Recorder Extension Module Chapter 2
The Recorder - Setup screen appears.
See Set Up Time Recorder Measurements on page 16 for assistance in
setting up the parameters.
5. To preview the measurement and start recording, press F3 (Start).
• See
Preview the Measurement on page 21 .
• See Record the Measurement on page 22 .
Reviewing Time Recorder
Measurements You can review previously recorded measurements with the Dynamix 2500 data
collector. Only a small portion from the end of the recorded data can be reviewed
with the data collector. To review the entire data file, you must transfer the file to
your computer.
See Save a Time Recorder Setup and Measurement on page 23 .
To review recorded measurements with your instrument, follow these steps.
1. From the Time Recorder Main Menu, select Recorder and press Enter.