Rockwell Automation 1492-CM800-LD001 Field Wire Conv. Module for Modicon B802-008 to 1756-OA8 - Manual (Page 4)

(4)
V. Fuse Installation and Replacement (Continued)
4) To replace the fuse turn the circuit board over. The fuses and fuse information is visible on the circuit board.
NOTES:
1) For conversion module operation a fuse must be inserted into each of the 2 fuse holders.
2) Physical Fuse Size: 5 x 20 mm
3) Possible Fuse Suppliers: Shurter (Part Number:
0034.3123) and Cooper Bussmann (Part Number: GMC-4A) .
4) Fuse Current Rating Based on Conversion System Components: 4 Amps
VI. Conversion Module Re-assembly After Fuse Insertion/Replacement
1) To re-assemble the fused module, place the circuit board into the label side half of the module case with the fused
side of the circuit board UP.
10000021848 (Version 00)
Fuse Holders and
Fuse Data
Case surface with module label