beautypg.com

Rockwell Automation 1492-CM800-LD001 Field Wire Conv. Module for Modicon B802-008 to 1756-OA8 User Manual

Rockwell Automation Equipment

background image

Fused Field Wire Conversion Module for Modicon B802-008 to 1756-OA8
(Cat 1492-CM800-LD001)

10000021848

(Version 00)

Printed in Germany

Local language (French, Italian, German & Spanish) versions of this document can be downloaded by going to www.ab.com.
In the left margin click on Publications Library and Literature Library. In the Search Area (right margin), Search by Catalog
Number and in the Search box type in the catalog number of the conversion system component.

I. Module Description

The 1492-CM800-LD001 conversion module provides field wire signal conversion from a Modicon® B802-008, 80 to
130Vac , 8-pt output module to a ControLogix 1756-OA8, 74 to 265Vac , 8-pt output module. The conversion
module provides the mating connections to the B802-008 swing-arm (terminal block) with the attached field wires. It
routes those signals, via its 20-pin connector and a 1492-CABLEU pre-wired cable to the compatible terminals of
the 1756-OA8. To maintain the functionality of the B802-008 output module the conversion module provides a
mechanical fuse for each of the two power sources (L1-0 and L1-1) on the 1756-OA8 (refer to the Wiring Diagram and
Fuse Installation and Removal sections for details).

II. Module Installation

The 1492-CM800-LD001 conversion module must be installed in a 1492 conversion system base-plate and cover-
plate assembly. The installation of the module into the assembly is explained in the Installation Manual that ships with
the conversion assembly. For a list of compatible assemblies refer to Appendix A

III. Conversion Module Compatibility Matrix

De-energize and lockout any and all power to all I/O field devices connected to the Modicon 800 I/O
housing, and the power to the 800 I/O housing itself. Ensure all power is de-energized and locked out
to any device in the control cabinet where the conversion is to be performed. Ensure work is
performed by qualified personnel.

WARNING

This is the cable length in meters and tenths of meters (e.g. 015 = 1.5 meters). Recommended

cable length is 003 (00.3 meters).

Refer to conversion module Specifications Section: Maximum Operating Voltage

1492-CM800-LD001 Conversion Module

Conversion Module

Compatible 800

Output Module

Compatible 1756

Output Module

Required 1492 Cable

1492-CM800-LD001

B802-008

1756-OA8

1492-CABLEU

20-Pin Connector for 1492-CABLEU

Mating Connector for
B800 Terminal Block