beautypg.com

Rockwell Automation 1326AB Cable Connector Seals User Manual

Installation instructions

background image

Publication 1326A-5.23 - March 1998

Installation Instructions

Connector Seals for Series B IP67 Cables

for IP67 Torque Plus Motors

Use these instructions to install the series B IP67 cable seals on the
power input connector and the resolver or encoder output connector of
existing 460V 1326 IP67 motors. The seals must be used with the
following cables:

1326-xxx-L

1326-xxx-RAL

1326-xxx-RBL

1326-xxx-EL

1326-xxx-DL

Determining the Tools You Need

You will need a phillips screwdriver to install the components of the
IP67 Cable Seal Kit for your existing IP67 motor.

Identifying the Components of the IP67

Cable Seal Kit

The components are:

eight replacement connector screws

seal for the power input connector

seal for the resolver or encoder output connector

The top view of the IP67 seals that you received is shown below:

If you ordered this kit and did not receive these components, contact
your local Allen-Bradley representative.

Output connector

seal

Input connector

seal