Rockwell Automation 1606-XLP15A Power Supply Reference Manual User Manual
Page 15
All parameters are specified at 5V, 3A, 230Vac, 25°C ambient and after a 5 minutes run-in time unless noted otherwise.
Rockwell Automation Publication 1606-RM019A-EN-P — March 2014
15
Bulletin 1606 Switched Mode Power Supplies
Product certification information (including Certificates and Declarations of Conformity) can be found at
www.ab.com/certifications
.
EN 60950-1, EN 61204-1
Complies with CE EMC and CE Low Voltage Directives
UL 508
LISTED E56639 for use in the U.S.A. (UL 508) and Canada
(C22.2 No. 14-95). Industrial Control Equipment
UL 60950
RECOGNIZED E168663 for use in the U.S.A. (UL 60950-1) and
Canada (C22.2 No. 60950)
Information Technology Equipment, Level 3
NEC Class 2
NEC
CLASS 2
Listed as Limited Power Source (LPS) in the UL 60950-1 UL report.
According to NEC (National Electrical Code) Article 725-41 (4).
CSA C22.2 No. 107.1,
60950-1
CSA Certified under File Number 240020
GL (Germanischer Lloyd) classified for marine and offshore
applications. Environmental category: C, EMC2
See below for link to Certificate.
Marine
GOST R
GOST R certification is applicable for products intended for sale
and use within Russia. See below for link to Certificate.
ISA 12.12.01, CSA
C22.2 No. 213
RECOGNIZED UNDER FILE NUMBER E244404 for use in the U.S.A.
(ISA 12.12.01) and Canada (C22.2 No. 213)
Hazardous Location ClassI, Div. 2, Groups A, B, C, D
Marine RINA
RINA (Registro Italiano Navale) certified. See below for link to
Certificate.
C-TICK
C-Tick compliance is for products intended for sale and use within
the Australian market. See below for link to the C-Tick Declarations
of Conformity.