Rockwell Automation 141A Mounting Ssystem MCS Star Tutorial - Manual (Page 17)

15
Now let’s tighten up the spacing by moving the middle busbar support to the right, up against
the motor starter 3. Notice the other components will move to the right along with it.
Now we need to add the second rack. Th is can be done by clicking on “Mounting System” in
the main tool bar and then selecting “Add Rack” . Note: You will notice that the new rack will
contain the Main Circuit Breaker as the supply type, as was used when you created the fi rst rack.
Step 10:
Moving Components
(continued)
Step 11:
Adding Additional
Racks