Rockwell Automation 283D ArmorStart - Getting Started User Manual

Armorstart, Distributed motor controller, Getting started

QUICK START

ARMORSTART

DISTRIBUTED

MOTOR CONTROLLER

Getting Started

BULLETIN 283D

Introduction

This guide provides the basic information required to start up your

ArmorStart

Distributed Motor Controller. Factory default settings

and information regarding installing, programming, and DeviceNet™
Node Commissioning are described here. For detailed information on
specific product features or configurations, refer to the ArmorStart
user manual, publication 283-UM001*-EN-P.

This guide is intended for qualified service personnel responsible for
setting up and servicing these devices. You must have previous
experience with and a basic understanding of electrical terminology,
configuration procedures, required equipment, and safety precautions.
You should understand DeviceNet network operations, including how
slave devices operate on a network and communicate with a
DeviceNet master. You should also be familiar with RSNetWorx™
for DeviceNet. You must use RSNetWorx for DeviceNet Revision
3.21 Service Pack 2 or later. This software package is referred to
often in this manual. Rockwell Automation product EDS files are
available on the internet at: http://www.ab.com/networks/eds