Rockwell Automation 150-F84L_F86L Soft Starter Protective Modules - Manual (Page 7)

PN-164127
DIR 41053-227 (Version 07)
Publication 150-IN036G-EN-E
Printed in U.S.A.
SMC-50 Protective Module Installation Instructions
(Cat 150-F84L (480V), 150-F86L (600V))
Load Terminal Cover Removal
1
4
4
5
7
6
6 3
8
2
Protective Modules Installation
Line Terminal Cover Removal
7
6
6
1
3
4
4
5
8
2
10 lb-in
(1.1 Nm)
28 lb-in
(3.2 Nm)
2
1
28 lb-in
(3.2 Nm)
1
WARNING: To prevent electrical shock, disconnect from power source before installing
or servicing. Install in a suitable enclosure. Keep free from contaminants.
WARNING: Protective modules must not be mounted on the load side when used with controllers that use an
inside-the-delta motor connection or with pump, linear deceleration or braking control. Installing them with a Delta motor
connection will result in immediate damage to the protective module.