Rockwell Automation 150 SMC Dialog Plus Controller - Quick Start - Manual (Page 11)

Rockwell Automation Publication 150-QS002B-EN-P - October 2011 11
Quick Start
Programming The SMC Dialog Plus controller can be programmed with the built-in keypad
and LCD display or with the optional Bulletin 1201 human interface modules.
Parameters are organized in a four-level menu structure and divided into
programming groups.
Keypad Description
Escape
Pressing the Escape key causes the programming system to move up
one level in the menu structure.
Select
The Select key has two functions:
• Pressing the Select key alternately causes the top or bottom line of
the display to become active (indicated by flashing first character).
• In parameter modification with series A FRN 3.00 or greater and
series B human interface modules, Select moves the cursor from
the least significant digit to the most significant.
Up/Down
Arrows
These keys are used to increment and decrement a parameter value or
to scroll through the different modes, groups, and parameters.
Enter
When pressed, a mode or group will be selected, or a parameter
value will be entered into memory. After a parameter value has been
entered into memory, the top line of the display will automatically
become active, allowing the user to scroll to the next parameter.
ESC
SEL