Brady X-Plus II User Manual
Page 84
Configuration
Control Panel Parameters
74
14068L-001 Rev. A
X-Plus II User Guide
1/11/07
Format Memory Card
This option erases all previously stored information from the optional
PCMCIA card or Compact Flash card.
Caution • This option completely erases the selected card.
To format a memory card:
1.
Press the left oval to select
A:
or the right oval to select
B:
.
If your printer is set to require a password, you are prompted to enter
the password.
2.
Enter the password. For instructions, see
.
3.
Press the appropriate button again to select the desired card.
The display shows
ARE YOU SURE?
.
4.
Do you wish to continue?
• Press the left oval to select
NO
to cancel the request and return to
FORMAT CARD
prompt.
• Press the right oval to select
YES
and begin initialization.
When initialization is complete, the printer automatically exits Setup
mode, and the control panel displays
PRINTER READY
. If you exit
Setup mode while initialization is still in process, the control panel
display flashes between the phrases
CHECKING B: MEMORY
and
PRINTER IDLE
.
Note •
Depending on the amount of memory in the memory card,
initialization may take up to 5 minutes to complete.
Table 9 • Printer Parameters (Sheet 11 of 26)
Parameter
Action/Explanation
FORMAT CARD:
A: B: