Brady X-Plus II - Manual (Page 44)

Operations
Print Modes 34
14068L-001 Rev. A X-Plus II User Guide 1/11/07
Print Modes
The printer can print on roll or fanfold media and use different print modes for label removal.
Use a print mode that matches the media being used and the printer options available
(
Table 6 ). For more information on the types of media, see Types of Media on page 26 .
Table 6 • Print Modes
Mode When to Use Printer Action
Tear-Off (default setting) Use for most applications.
Can use roll or fanfold
media. See
Load Media in
Tear-Off Mode on page 35 .
Each label or strip of labels
can be torn off after printing.
Peel-Off Use only if printer has the
Peel-Off or Rewind option.
Usually uses roll media. See
Load Media in Peel-Off
Mode on page 93
.
The liner is peeled away
from the label during
printing. When the printed
label is removed, the next
label prints.
Cutter Use only if printer has a
cutter option. Usually uses
roll media. See
Load Media
in Cutter Mode on page 100 .
The printer automatically
cuts the label after it is
printed.
Rewind Use only if printer has the
Rewind option without a
cutter. Can use roll or
fanfold media. See
Load
Media in Rewind Mode (No
Cutter) on page 105
.
The media and/or liner are
rewound onto a core as they
are printed.
Rewind with Cutter Option Use only if printer has the
Rewind option and a cutter.
Can use roll or fanfold
media. See
Load Media in
Rewind Mode with Cutter
Option on page 112
.
The media and/or liner are
rewound onto a core as they
are printed. The labels are
not cut.