Brady X-Plus II - Manual (Page 143)

133 Routine Maintenance
Clean the Cutter
1/11/07 X-Plus II User Guide 14068L-001 Rev. A
Clean the Cutter
If the cutter is not cutting the labels cleanly or if it jams with labels, clean the cutter.
To clean the cutter, complete these steps:
1. Turn off (O) the printer.
2. Unplug the power cord.
3. Clean the stationary cutter blade with a swab and solvent.
4. If cleaning does not remove label fragments and adhesive, contact an authorized service
technician.
Caution • The cutter blade is sharp. Do not touch or rub the blade with your fingers.