Brother FAX-3800 - Manual (Page 89)

R E M O T E F A X O P T I O N S 9 - 2
4
If your pager requires a PIN, enter the
PIN, press #, press Redial/Pause, enter
your FAX/MFC telephone number
followed by # #, and then press Menu/Set.
For example, 1 2 3 4 5 # Redial/Pause 1 8 0 0 5 2 1 2 8 4 6 # #
—OR—
If you do not need a PIN, press Redial/Pause, enter the fax number of your
FAX/MFC followed by # #, and then press Menu/Set.
For example, Redial/Pause 1 8 0 0 5 2 1 2 8 4 6 # #
5
Press Stop/Exit.
Setting Fax Storage
If you set Fax Storage to ON, you will be able to retrieve fax messages from
another location using Fax Forwarding, Paging, or Remote Retrieval.
The LCD will indicate when you have a fax stored in memory.
1
Press Menu/Set, 2, 5, 2. The LCD
prompts you to choose a fax setting.
2
Press to select ON (or OFF ), and then press Menu/Set.
3
Press Stop/Exit.
Backup Print
If you have set FAX STORAGE to ON , your MFC automatically prints faxes
as they are received into memory, This is a safety feature in ease the power goes
out so you won’t lose your messages.
You cannot change a Paging number or PIN remotely.
Note
Press Redial/Pause for each 3.5 second delay, as needed.
If there are faxes in memory when you
turn the Fax Storage
OFF , the LCD
prompts you to erase any faxes in
memory.
If you press 1, all fax data is erased and Fax Storage is turned off. If you press
2, data is not erased and Fax Storage remains on.
(See
Printing a Fax in Memory , page 5-6.)
P I N # :
2 . F A X S T O R A G E
or
E R A S E A L L F A X ?
1 . Y E S 2 . N O