Brother FAX-3800 - Manual (Page 101)

M A K I N G C O P I E S 11 - 6
Changing the Default Copy Settings
Press Menu/Set, 3 to change default settings for Copy mode. These settings
will remain until you change them again by pressing Menu/Set. Adjust the
Contrast and Quality settings.
By pressing a number, you can adjust copy settings as shown in the following
chart. Press to scroll through the options for each setting. Press Menu/Set
to save your selection. Press Stop/Exit—OR—Press to select the next
setting you want to change.
Press Menu/Set, and 3.
Copy Mode (Type of Original)
You can select the Copy resolution for your type of original. The default setting
is
AUTO , which is used for originals that contain both text and photographs.
TEXT is used for originals containing only text. PHOTO is used for copying
photographs.
1
Press Menu/Set, 3, 1.
2
Press to choose the type of original ( AUTO , TEXT or PHOTO ), and then
press Menu/Set.
3
Press Stop/Exit.
Copy Contrast
You can adjust the copy contrast to make copies darker or lighter.
1
Press Menu/Set, 3, 2.
2
Press to make a copy lighter
—OR—Press to make a copy darker,
and then press Menu/Set.
3
Press Stop/Exit.
or
TEXT
1.COPY MODE
2.CONTRAST - +
is default
AUTO
PHOTO
1 . C O P Y M O D E
or
2 . C O N T R A S T